[WheelWatcher] AVR ATMega at 8MHz

["Tim Chapman" <tim@xxxxxxxxx>]

I am running the code found at
http://www.nubotics.com/support/ww01/code/atmel/bascom/ww01_bascomavr_monito
r.bas.php
I have an ATMega running on the internal oscillator at 8MHz.
I am getting output showing all the values advancing just fine.
I am getting no output to the servos.  I checked the signals with my
oscilloscope on PinD.4 and PinD.5 as well as PinC.2 and PinC.5.  Nothing
going on there at all.

Will this work at 8MHz or is 16MHz required?

Thank you for your time.

Tim