Re: [WheelWatcher] WheelWatcher on a Vex

To: WW-01/WW-02 WheelWatcher Encoder Support List <wheelwatcher@xxxxxxxxxxxxxxxxx>
Subject: Re: [WheelWatcher] WheelWatcher on a Vex
From: Pete Skeggs <plskeggs@xxxxxxxxxxxxxxxx>
Date: Wed, 22 Feb 2006 08:46:49 -0800
Delivered-to: mailman-wheelwatcher@xxxxxxxxxxxxxxxxx
In-reply-to: <004201c6376e$26818330$0100a8c0@VJR>
References: <004201c6376e$26818330$0100a8c0@VJR>
Reply-to: WW-01/WW-02 WheelWatcher Encoder Support List <wheelwatcher@xxxxxxxxxxxxxxxxx>
User-agent: Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.7.7) Gecko/20050414

Sounds like a good thing to try.  Let us know how it turns out, OK?

Here's a link to a drawing.  Good luck!

http://www.nubotics.com/support/ww02/gm8-dims.pdf

Sincerely,
Pete Skeggs
Nubotics Tech Support

John Hansen wrote:

I want to try using a WheelWatcher, probably a WW-02, on a Vex Robot.
Vex servos do not have a flat top and Vex wheels lock to a 1/8" axle.
Is a dimensioned drawing of the WW board available or can you
tell me is the diameter of the drive hole?

Follow-Ups:
- Re: [WheelWatcher] WheelWatcher on a Vex
  - From: Pete Skeggs

References:
- [WheelWatcher] WheelWatcher on a Vex
  - From: John Hansen

Previous by Date: [WheelWatcher] WheelWatcher on a Vex
Next by Date: Re: [WheelWatcher] WheelWatcher on a Vex
Previous by Thread: [WheelWatcher] WheelWatcher on a Vex
Next by Thread: Re: [WheelWatcher] WheelWatcher on a Vex
WW February 2006 archives indexes sorted by: [ thread ] [ subject ] [ author ] [ date ]
WW list archive Table of Contents
More information about the WW mailing list

This archive was generated by a fusion of Pipermail (Mailman edition) and MHonArc.