From john_hansen at sbcglobal.net  Tue Feb 21 21:09:24 2006
From: john_hansen at sbcglobal.net (John Hansen)
Date: Tue Feb 21 21:09:28 2006
Subject: [WheelWatcher] WheelWatcher on a Vex
Message-ID: <004201c6376e$26818330$0100a8c0@VJR>

I want to try using a WheelWatcher, probably a WW-02, on a Vex Robot.
Vex servos do not have a flat top and Vex wheels lock to a 1/8" axle.
Is a dimensioned drawing of the WW board available or can you
tell me is the diameter of the drive hole?

From plskeggs at noeticdesign.com  Wed Feb 22 08:46:49 2006
From: plskeggs at noeticdesign.com (Pete Skeggs)
Date: Wed Feb 22 08:46:55 2006
Subject: [WheelWatcher] WheelWatcher on a Vex
In-Reply-To: <004201c6376e$26818330$0100a8c0@VJR>
References: <004201c6376e$26818330$0100a8c0@VJR>
Message-ID: <43FC9579.5050709@noeticdesign.com>

Sounds like a good thing to try.  Let us know how it turns out, OK?

Here's a link to a drawing.  Good luck!

http://www.nubotics.com/support/ww02/gm8-dims.pdf

Sincerely,
Pete Skeggs
Nubotics Tech Support

John Hansen wrote:

>I want to try using a WheelWatcher, probably a WW-02, on a Vex Robot.
>Vex servos do not have a flat top and Vex wheels lock to a 1/8" axle.
>Is a dimensioned drawing of the WW board available or can you
>tell me is the diameter of the drive hole?
>  
>



From plskeggs at noeticdesign.com  Thu Feb 23 19:43:05 2006
From: plskeggs at noeticdesign.com (Pete Skeggs)
Date: Thu Feb 23 19:43:22 2006
Subject: [WheelWatcher] WheelWatcher on a Vex
In-Reply-To: <43FC9579.5050709@noeticdesign.com>
References: <004201c6376e$26818330$0100a8c0@VJR>
	<43FC9579.5050709@noeticdesign.com>
Message-ID: <43FE80C9.1090007@noeticdesign.com>

Pete Skeggs wrote:

Sorry -- I sent you a link to an out of date version.  Here is the 
correct version:
http://www.nubotics.com/support/ww02/ww02-public.pdf

Sincerely,
Pete Skeggs
Nubotics Tech Support

> John Hansen wrote:
>
>> I want to try using a WheelWatcher, probably a WW-02, on a Vex Robot.
>> Vex servos do not have a flat top and Vex wheels lock to a 1/8" axle.
>> Is a dimensioned drawing of the WW board available or can you
>> tell me is the diameter of the drive hole?
>>  
>>
>
>
>