Re: [WheelCommander] Question

["Hank van Buuren" <hvburen@xxxxxxxxxxxx>]

Pete

There is no visible damage to the board and

I have transferred the data by hand.

Hank.

----- Original Message -----

From: Pete Skeggs

To: WC-132 WheelCommander Controller Support List

Sent: Sunday, January 03, 2010 3:08 AM

Subject: Re: [WheelCommander] Question

Hank,

Is there physical damage to the board, or is the problem not apparent from looking closely at the board?

I wonder if one or more of the EEPROM locations is corrupted.  Can you take screenshots of the Wizard screen showing all the constants for me, for both the good and bad controllers?You'll unfortunately need to do this for each screen twice, since the list is long and does not all fit in the visible part of the window at once (you'll need to scroll down to show the end of the list).    Alternatively, you could just check and compare each one yourself between the good and bad controllers.

As a reference, this is shown as page 21 in the Wizard manual.
http://www.nubotics.com/products/wc132/wizard_manual-1.01.pdf

-Pete


Hank van Buuren wrote:

Pete,

Is there any way of repairing the WC-132, for some unexplainable reason on  J14, connection  #1 PWM is only putting out 5.0 Volts. Right now I am running on my spare WC-132. I would like to have it fixed.

Regards, Hank van Buuren

---

_______________________________________________
WheelCommander mailing list
WheelCommander@xxxxxxxxxxxxxxxxx
http://list.nubotics.com/mailman/listinfo/wheelcommander
Nubotics Website:
http://www.nubotics.com/index2.html

              spare  problem
mode      209	216	
baud       2	4
12ca       32	32
kpv         6	6
kiv          4	4	
kdv         1	1
kfv          16	16
unused    0	0
kpp         6	6
kip          4	4	
kdp         1	1	
kdpp       4	4	
kdip        0	0
kdpv        0	0
kdiv         4	4
kdh         1	1
kph         1	1
kpvth       2	2
kvth         2	2
kwb_l      165	35
kwb_h      0	0
kwc_l       44	82
kwc_h      1	0
kiz_l        119	119
kiz_h       1	1	
Krz_l        119	119
vmx_l        136	136
vmx_h       19	19
axsgn        0	0
am_l          200	200
am_h         0	0
lb_l            0	0
lb_h           0	0
pwm          3	5
extmode    2	2
tpr_l          128	128	
tpr_h         0	0
kddp         1	1
kdpv         1 	1
kip            16	16
kwc_dl      0	0
kwc_dh     0	0
m_l           200	200
m_h          0	0
rb_l           0	0	
rb_h          0	0
kob           9	9